The operating system of hermetic water heaters is different from chimney water heaters. When the water is on, it works for a while to check whether its components are working or not. So, hot water starts to flow after 10-15 seconds due to this pre-control. If you do not want to experience this delay, install a water heater under the kitchen sink or sink. If the thermostat is a few degrees below the water temperature, the water heater will get deactivated. In this way, you will not waste electricity.
Is there any danger in hermetic water heaters?
Hermetic water heaters are more reliable than typical water heaters because they do not use oxygen in their environment. If there is no gas leakage in the gas connections coming to the water heater and there is no problem with the pipe connection, there is no danger.
Should we use hermetic water heaters or a vented water heater?
Hermetic water heaters are more reliable and advantageous as they are directly connected with the outside air with their chimney and use the outside air for combustion.
What are the features of the geyser?
Water heaters are devices that work with natural gas or LPG and produce hot water instantly and continuously.
Can I get information about the proportionality control feature in the vented geyser?
Proportion control is the feature of obtaining a constant outlet water temperature at different water flow rates. Despite the variable use of the water flow with a certain power, the leaving water temperature remains the same, creating comfort for the product and the customer. In this way, the product gains a thermostatic feature.
Can I have the vented water heater installed in the bathroom? What are the disadvantages?
Water heaters are not allowed to get installed in the bathroom. The most important reason for this practice is that most of the existing chimneys in the houses do not comply with the standards. Noritz, Rinnai, and Navien hermetic water heaters are products suitable for installation in the bathroom with their combustion chamber independent of the external environment and specific waste gas chimney system.
Do hermetic water heaters only work with natural gas?
Hermetic water heaters work with both LPG and natural gas. When you inform your authorized service which type of use you prefer, you can use it as you wish after a little change of apparatus (nozzle).
Can the hermetic water heaters be connected to the chimney or ventilation of the apartment?
Connecting hermetic water heaters to an apartment chimney or ventilation gap is dangerous. The original chimneys of hermetic water heaters must get exposed to the outside environment.
What is the water temperature problem when some devices are operating in both the bathroom and the kitchen?
If the capacity of your water heater is not sufficient, the desired water temperature cannot get achieved when the outlets are on in the kitchen and bathroom at the same time.
Can a hermetic water heaters be used when the electricity is off?
Hermetic water heaters protect themselves in case of power cuts. When the electricity comes, the water heater does not work by itself. The user must press the ON/OFF button of the water heater again.
Hot water is running in the kitchen, but not in the bathroom. Why?
If hot water is running in the kitchen but not in the bathroom, there is a problem with your hot water pipes going to the bathroom faucet. Please call your plumber.
What is the quality difference in water heaters?
The copper pipes used in the heat exchangers of the water heaters should contain max.25 ppm oxygen. If the device is using a copper pipe with a higher amount of oxygen, it will cause the copper pipes to get pierced in a short time. Therefore, tin coating on the copper pipe can be applied. However, this coating will not be long-term. Generally, a copper pipe containing oxygen is for cheapness. Noritz, Rinnai, and Navien use oxygen-free copper pipes.
What are the thermosiphon features?
The electric water heater is a storage water heater that heats the domestic water with electrical resistance.
What should I do to obtain more effective heating from my water heater?
The ideal operating temperature for your water heater is Eco Mode. This feature will operate the device at the optimum temperature level and enable you to spend your energy most economically. In addition, regular maintenance of the heater in your device and replacing the Mg anode every two years will increase the heater efficiency and extend your device life.
My water heater is heating less compared to the first days, what should I do?
When the water temperature rises above about 60 degrees, the lime in the water begins to precipitate. The calcification that occurs at the bottom of our teapots is because of this physical feature. Similarly, a lime layer forms overtime on the resistance that heats the water in the water heater and is in contact with the water. This layer gets thicker day by day and acts as an insulator that prevents the heat of the resistance from passing into the water. This event reduces the performance of the water heater. There will be a significant reduction in energy consumption after maintenance.
There is an odor from the water I take from my water heater; why?
All kinds of water heaters are proper to get used with city water. Apart from this, artesian waters, well waters, stream waters, waters that have been waiting in tanks may give off an odor when heated due to the water’s characteristics.