How to Fix the Common Tankless Electric Water Heaters Problem? 

Tankless electric water heaters are a smashing investment. This type of heater is not only highly effective and efficient, but also they can save you a lot of money by heating water just on-demand.

They are popular because they are less likely to create a problem, and they are eco-friendlier 10 to 20 Channel type of heaters. But the fact is, problems can arise in any unit. In this article, we will take a look at some of the most common tankless water heater problems and how to solve them.

Electric water heaters problems

Have you ever experienced the cold water shower every now and then? There might be a problem with your tankless heater, but what could be? a number of things could cause this problem. So first, unplug the unit and open it. It is time to take a closer look.

No supply

You might find out that the heater is not working at all. A plugged heat exchanger might have caused the hard water supply. Sometimes a blocked vent could shut down the heater. However, it is possible to face, and they’re cheap burner or bad ignitor responsible for the failure.

The first thing to solve this problem is to reduce water usage. If, by doing so, you have managed to solve the problem, the problem is with the demand and not with the unit. Perhaps you didn’t choose the right size of tankless water heater for your home or office. It’s time to think about getting a new unit that will match your demand.

If reducing the music does not solve the problem, there is an electric or gas supply issue. Check the wrench to see if they are blocked.

Not enough hot water

Don’t you have enough water? It is clearly happening because you have purchased is a smaller unit, and it is not able to provide ain’t no hot water for your household. As a rule of thumb, always remember to buy units according to your family’s needs, so you will always have enough hot water available.

To solve this problem, you have to buy a bigger unit. But if you already have the biggest unit possible, you need to reduce your water usage to try shows and the length of your showers.

Too Hot Water Supply

It is really unpleasant to experience a hot water burn. This can really hurt your skin, and there might be a fault with the thermostat. The temperature might be set too high. In this case, you need to set the temperature at the normal temperature. What is might not work in some cases; for instance, if the Thermostat sensor is not working properly, it might become loose. First, adjust the sensor, then clean up the showerhead. If by doing so, you don’t have a problem anymore, then the problem was with the thermostat setting. But if you still experience too hot water, you should take a look at sensors.

First, you have to disconnect the electric power supply to the tankless electric water heaters to solve this problem. Check the thermostat temperature setting; it might be between 110 and 125 degrees.

Using a flat-head screwdriver, adjust the temperature, then reconnect the electric power supply and wait for hot water to flow from the faucet.

Low water pressure

Showering with no water pressure is not satisfying. So first, make sure there aren’t too many applications drawing bother simultaneously.

Sometimes low water pressure happens due to a fault in the utility company, so make sure the issue isn’t on their end.

A reduction in gas pressure can result in the same issue.

In the next step, make sure there are no blockages in the water filter, fixtures, or plumbing.

Mineral Accumulation

The collection of minerals in a water heater could cause serious problems. Hard water contains high mineral materials such as calcium and magnesium. Over time, the minerals accumulate on your tankless heater’s interior parts and parts. If you see discolored warm water when you turn on the tap on the sink, it is a clear sign of mineral accumulation in your tankless electric water heaters. In severe cases, the color of water would be yellow or brown. It is a good idea to install a water softener in your house; this device removes minerals particles from water it goes through your heater.

The heater keeps shutting off

So many things can cause this issue:

• A loose wire
• A blocked water heater filter
• Wrong water flow rate

But there might be a more serious problem as follows as well:

 Water leakage

The valves and connections of the unit might leak. Loose connections and corroded pipes might cause leakage. In that case, we’ll solve the problem by tightening the connections and installing a water softener.

Rusty Odor Water

The Border normally is odor-free, so if you smell a weird odor, the chances are bacteria are growing in your unit. In that case, you need to replace the anode rod immediately.

Noisy Water Heating

A tankless electric water heater can make unpleasant sounds due to sediment build-up in the tank. First, you need to empty the tank then clean it. It is recommended to do monthly maintenance to avoid mineral accumulation. Otherwise, the accumulation of minerals could cause serious problems that you cannot fix on your own. So make a schedule for maintaining the unit regularly.

Solve the common problem yourself

In most cases, it is possible to solve the tankless electric water heater problems independently. Make sure that the power supply is disconnected before opening the unit. If you have a serious problem, do not even think about opening the unit because it might be dangerous. In such cases, you should consult with a plumber or electrician.

One of the most common tankless electric water heater issues is not having enough hot water. If you calculate the amount of hot water you need in your peak hours, you can select the right unit size for your home or office.